NuTone WS1 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Hottes de cuisine NuTone WS1. NuTone WS1 User's Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 12
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
Page 1
ALLURE™ WS1 SERIES
RANGE HOOD
!
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO
PERSONS, OBSERVE THE FOLLOWING:
1. Use this unit only in the manner intended by the manufacturer. If you have
questions, contact the manufacturer at the address or telephone number
listed in the warranty.
2. Before servicing or cleaning unit, switch power off at service panel and
lock the service disconnecting means to prevent power from being
switched on accidentally. When the service disconnecting means cannot
be locked, securely fasten a prominent warning device, such as a tag, to
the service panel.
3. Installation work and electrical wiring must be done by a qualified
person(s) in accordance with all applicable codes and standards, includ-
ing fire-rated construction codes and standards.
4. Sufficient air is needed for proper combustion and exhausting of gases
through the flue (chimney) of fuel burning equipment to prevent backdraft-
ing. Follow the heating equipment manufacturer’s guideline and safety
standards such as those published by the National Fire Protection As-
sociation (NFPA), and the American Society of Heating, Refrigeration and
Air Conditioning Engineers (ASHRAE), and the local code authorities.
5. When cutting or drilling into wall or ceiling, do not damage electrical wiring
and other hidden utilities.
6. To reduce the risk of fire or electric shock, do not use this range hood
with an additional speed control device.
7. Ducted fans must always be vented to the outdoors.
8. To reduce the risk of fire, use only metal ductwork.
9. Use with approved cord-connection kit only.
10.This unit must be grounded.
TO REDUCE THE RISK OF A RANGE TOP GREASE FIRE:
1. Never leave surface units unattended at high settings. Boilovers cause
smoking and greasy spillovers that may ignite. Heat oils slowly on low
or medium settings.
2. Always turn hood ON when cooking at high heat or when cooking flaming
foods.
3. Clean ventilating fans frequently. Grease should not be allowed to
accumulate on fan or filter.
4. Use proper pan size. Always use cookware appropriate for the size of
the surface element.
TO REDUCE THE RISK OF INJURY TO PERSONS IN THE EVENT OF A
RANGE TOP GREASE FIRE, OBSERVE THE FOLLOWING:*
1. SMOTHER FLAMES with a close-fitting lid, cookie sheet, or metal tray,
then turn off the burner. BE CAREFUL TO PREVENT BURNS. If the
flames do not go out immediately, EVACUATE AND CALL THE FIRE
DEPARTMENT.
2. NEVER PICK UP A FLAMING PAN — You may be burned.
3. DO NOT USE WATER, including wet dishcloths or towels - violent steam
explosion will result.
4. Use an extinguisher ONLY if:
A. You know you have a Class ABC extinguisher and you already know
how to operate it.
B. The fire is small and contained in the area where it started.
C. The fire department is being called.
D. You can fight the fire with your back to an exit.
* Based on “Kitchen Fire Safety Tips” published by NFPA.
ALLURE
WS1 SERIES
RANGE HOODS
READ AND SAVE THESE INSTRUCTIONS
Installer: Leave this manual with
the homeowner.
Homeowner: Operating and
Cleaning information on page 5.
Page 1
CAUTION
1. For general ventilating use only. Do not use to exhaust hazardous or
explosive materials and vapors.
2. To avoid motor bearing damage and noisy and/or unbalanced impellers,
keep drywall spray, construction dust, etc. off power unit.
3. For best capture of cooking impurities, your range hood should be
mounted so that the top of the hood is 24-30” above the cooking surface.
4. Please read specification label on product for further information and
requirements.
TABLE OF CONTENTS
This manual is divided into sections as follows:
“PREPARE HOOD LOCATION”
Run ductwork from roof or wall cap, and electrical wiring from service
panel - to installation location
“PREPARE THE HOOD”
Get your hood ready for installation
“CONNECT WIRING”
Make electrical wiring connections to hood
“INSTALL HOOD”
Secure hood to cabinet and ductwork - install bulbs and filters
“OPERATION”
How to use the hood controls
“CLEANING”
Keep your hood in top working condition
“SERVICE PARTS”
Part numbers and exploded view of hood components
“WARRANTY”
One-year limited warranty and how to contact us
NOTE If hood is to be installed Non-Ducted:
Purchase a set of (2) non-ducted filters from your
local distributor or retailer and attach them to the
aluminum mesh filters.
Patent No.:
US D450, 829 S
!
FOR DOMESTIC COOKING ONLY
!
Vue de la page 0
1 2 3 4 5 6 ... 11 12

Résumé du contenu

Page 1 - RANGE HOODS

Page 1ALLURE™ WS1 SERIESRANGE HOOD !WARNINGTO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:1. Use this uni

Page 2 - PREPARE HOOD LOCATION

Page 10ALLURE™ WS1 SERIESRANGE HOOD CONEXIÓN ELÉCTRICA1 Haga la conexión eléctrica del suministro doméstico (120 VCA) en la campana. Si es nece

Page 3

Page 11ALLURE™ WS1 SERIESRANGE HOOD CAMPANA EXTRACTORASERIE WS1 ALLURE™Página 11ADVERTENCIA: Para reducir el riesgo de una descarga eléctric

Page 4 - CONNECT WIRING

Page 12ALLURE™ WS1 SERIESRANGE HOOD CAMPANA EXTRACTORASERIE WS1 ALLURE™626976DCAMPANA EXTRACTORASERIE WS1 ALLURE™Página 12PIEZAS DE SERVICIO CLAVE

Page 5 - NON-DUCTED FILTERS

Page 2ALLURE™ WS1 SERIESRANGE HOOD CABINETBOTTOMCABINET FRONTHORIZONTAL DUCTACCESS HOLE5¼"5¼"7½"1/8"¾"1315/16" (30&qu

Page 6 - SERVICE PARTS

Page 3ALLURE™ WS1 SERIESRANGE HOOD PREPARE THE HOOD PREPARE THE HOOD3 Remove Damper/Duct Connector from inside the hood. Set connec-tor aside - wi

Page 7 - SERIE WS1 ALLURE

Page 4ALLURE™ WS1 SERIESRANGE HOOD CONNECT WIRINGWARNING: To reduce the risk of electric shock, make sure power is switched off at the service pane

Page 8 - SE VA A INSTALAR LA CAMPANA

Page 5ALLURE™ WS1 SERIESRANGE HOOD WARNING: To reduce the risk of electric shock, disconnect from power supply before cleaning.Aluminum mesh filter

Page 9

Page 6ALLURE™ WS1 SERIESRANGE HOOD 626976DWARRANTYNUTONE ONE YEAR LIMITED WARRANTYNuTone warrants to the original consumer purchaser of its produc

Page 10 - PREPARACIÓN DE LA CAMPANA

Page 7ALLURE™ WS1 SERIESRANGE HOOD !ADVERTENCIAPARA REDUCIR EL RIESGO DE INCENDIO, CHOQUE ELECTRICO, O LESION A PERSONAS, PROCURE LO SIGUIENTE:1.

Page 11 - INSTALACIÓN DE LA CAMPANA

Page 8ALLURE™ WS1 SERIESRANGE HOOD TORNILLOS PARA EL MONTAJE DE LA CAMPANA (4)12.7 cm35.4 cm (campana de 76.2 cm)43.0 cm (campana de 91.4 cm)50.6 c

Page 12

Page 9ALLURE™ WS1 SERIESRANGE HOOD PREPARACIÓN DE LA CAMPANAPREPARACIÓN DE LA CAMPANAPágina 93 Quite el conector del regulador de tiro/conector de

Commentaires sur ces manuels

Pas de commentaire