NuTone LA14WH Manuel d'utilisateur télécharger pdf

INSTALLATION INSTRUCTIONS

READ & SAVE THESE INSTRUCTIONS!

TO REGISTER THIS PRODUCT, VISIT WWW.NUTONE.COM

Recess-Mounted

Door Chime

• Your NuTone Door Chime is designed for two-door

operation. For best results, use NuTone Model C905

Transformer.

• Handle the door chime carefully as you would any

precision instrument.

• Comply with local wiring codes when installing the

door chime.

• If upon completion of the installation the chime does not

operate, check your installation against these instructions.

If the chime still does not operate, check the pushbutton(s)

for poor contact or loose connections and wiring for

short circuits.

• If chime plungers should ever become sluggish in their

movement, clean the plungers with a nonflammable

cleaning fluid and wipe dry. CAUTION: NEVER OIL

CHIME PLUNGERS.

MOUNTING THE FRAME

Refer to Figure 1. The chime mechanism is shipped

mounted in the metal mounting frame. Remove the

cardboard plaster shield and remove the chime mechanism

from the frame by freeing one side and sliding to the side.

NEW CONSTRUCTION

1. Bend or break off the four mounting tabs. Do not bend

tabs inward.

2. Nail the chime mounting frame to a wall stud in the

required location. Position the mounting frame so the

front edge will be flush to the finished wall surface.

3. Complete the wiring connections.

EXISTING CONSTRUCTION

1. In the desired location between wall studs, mark around

the mounting frame and prepare a 4

/8” wide by 7” high

cutout.

2. Insert the frame into the cutout until the mounting tabs are

positioned against the wall.

3. Bend the recessed mounting tabs out until they contact the

inside of the wall. The mounting frame should be secured

firmly in position.

4. Complete the wiring connections.

MOUNTING THE DOOR CHIME

1. Install chime to mounting frame after finished wall is

in place.

2. Feed wires through the wiring entrance in the chime’s base

plate and make wire connections to the terminal board.

3. Slide the chime mechanism under the cover mounting

brackets and snap chime into frame.

4. Mount chime cover to mounting brackets by using

supplied screws.

WIRING

• Be certain the power has been disconnected at the main

source before making the connections.

• Comply with local electrical code.

• When stapling wires to studs or joists, do not allow staples

to cut through wire insulation.

1. Mount the transformer to a convenient junction box (attic

location not recommended) or circuit breaker box.

2. Connect house power leads to transformer leads: black to

black, white to white.

3. Run 2-conductor, 18 gauge cable from the transformer

screw terminals and from the pushbutton screw terminals

to the chime location.

4. Refer to Figure 2. Bring wires into the mounting frame.

Connect the transformer and pushbutton wires to the

terminal board on the chime base plate.

FIGURE 1

FIGURE 2

COVER

MOUNTING

BRACKET

SLIDE

CHIME

MECHANISM

FRONT DOOR

PUSHBUTTON

120v AC

WIRING

NUTONE C905

TRANSFORMER -

USE NUTONE MODEL

C907 OR C909 FOR

TWO OR

MORE CHIMES

COMMON

WIRES

REAR DOOR

PUSHBUTTON

TERMINAL

BOARD

CHIME No. 1

TERMINAL

BOARD

CHIME No. 2

18 GAUGE INSULATED

2-CONDUCTOR WIRE

FRONT FRONT

TRANS

REAR

MOUNTING

TABS

RECESS

MOUNTING

TABS

MOUNTING

FRAME

1 2 3 4

Résumé du contenu

Page 1 - Door Chime

INSTALLATION INSTRUCTIONSREAD & SAVE THESE INSTRUCTIONS!TO REGISTER THIS PRODUCT, VISIT WWW.NUTONE.COMRecess-MountedDoor Chime• Your NuTone Door

Page 2 - Carillón de Puerta

INSTRUCCIONES DE INSTALACIÓN¡LÉA Y GUARDE ESTAS INSTRUCCIONES¡PARA REGISTRAR ESTE PRODUCTO, VISITE A WWW.NUTONE.COMCarillón de Puertade Montaje Aparta

Page 3 - Carillon de porte

INSTRUCTIONS POUR L’INSTALLATIONLISEZ CES INSTRUCTIONS ET CONSERVES-LES! POUR ENREGISTRER CE PRODUIT, VISITEZ WWW.NUTONE.COMCarillon de porte encastr

Page 4 - 99526158B

99526158BOne Year Limited WarrantyWARRANTY OWNER: Broan-NuTone warrants to the original consumer purchaser of its products that such products will be

Commentaires sur ces manuels

Pas de commentaire

NuTone LA14WH Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Non NuTone LA14WH. NuTone LA14WH User's Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Non NuTone LA14WH