NuTone LK20FWWH Manuel d'instructions Page 1

Naviguer en ligne ou télécharger Manuel d'instructions pour Ventilateurs des ménages NuTone LK20FWWH. NuTone LK20FWWH Instructions / Assembly Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 4
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
MODELS LK20FWWH • LK20FWPB
LK20FWBS • LK20ASRB
Page 1
READ AND SAVE THESE INSTRUCTIONS
TRADITIONAL BOWL
LIGHT KITS
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK, OR INJURY
TO PERSONS, OBSERVE THE FOLLOWING:
1. Use this unit only in the manner intended by the manufacturer. If
you have questions, contact the manufacturer at the address or
telephone number listed in the warranty.
2. Before servicing or cleaning unit, or installing a light kit, switch power
off at service panel and lock service panel to prevent power from
being switched on accidentally. When the service disconnecting
means cannot be locked, securely fasten a prominent warning
device, such as a tag, to the service panel.
3. Installation work and electrical wiring must be done by a qualified
person(s) in accordance with all applicable codes and standards,
including fire-rated construction codes and standards.
4. Make sure all wire connections are secure, and that there are no
exposed conductor strands.
5. Do not use water or detergents when cleaning the light kit. A dry dust
cloth or lightly dampened cloth will be suitable for most cleaning.
INSTALLATION
CAUTION: To reduce the risk of fire and electric shock, this light
kit should be used only with these fan models manufactured by
Broan-NuTone LLC: CFS52WH, CFS52PB, CFS52BS, CFS52RB,
CFH52WH, CFH52PB, CFH52BS, CFH52RB.
NOTE: Before starting installation, disconnect the power by
turning off the circuit breaker or removing the fuse at fuse box.
Turning power off using the fan switch is not sufficient to prevent
electric shock.
1. Remove plug in bottom of fan switch housing cover. Feed (2)
wires from top of light kit fitter through hole in bottom of fan switch
housing cover. Screw threaded conduit into switch housing cover.
Then secure light kit to detachable switch housing cover with lock
washer and nut provided. (Fig. 1)
2. Hold light kit
a
ssembly under fan, locate two single white and blue
wires in the switch housing labeled “FOR LIGHT”. Connect wiring
- white to white and blue to black.
3. Carefully push all wires back into the switch housing, then install the
light kit assembly onto the switch housing with 3 screws provided.
Be sure to tighten all screws. (Fig. 2)
4. For greatest energy efficiency, install (2) 13 Watt compact
fluorescent bulbs (included). (Fig. 2) Note: For incandescent lighting,
this light kit can accept (2) 40W, medium-base incandescent bulbs.
(Purchase incandescent bulbs separately.) DO NOT EXCEED
MAXIMUM WATTAGE RATING.
5. Gently slide the glass shade over steel tensioners. Make sure glass
shade is fully inserted into socket for a secure fit. (Fig. 2)
6. Restore power and check light kit operation.
The weight of your light kit is 11.4 lbs.
FIGURE 1
SWITCH HOUSING
COVER
NUT
LIGHT
KIT
LOCKWASHER
PLUG
SCREWS
FIGURE 2
WIRE NUTS
SWITCH
HOUSING
STEEL
TENSIONERS
PULL
CHAIN
BULB
GLASS
SHADE
LIGHT
KIT
ASSEMBLY
SERVICE PARTS
PART NO. DESCRIPTION
S77000930 GLASS SHADE (LK20FWWH, LK20FWPB, LK20FWBS)
S77000933 GLASS SHADE (LK20ASRB)
S77000934 LIGHT KIT (LK20FWWH)
S77000935 LIGHT KIT (LK20FWPB)
S77000936 LIGHT KIT (LK20FWBS)
S77000937 LIGHT KIT (LK20ASRB)
S77000938 PARTS BAG (LK20FWWH)
S77000939 PARTS BAG (LK20FWPB)
S77000940 PARTS BAG (LK20FWBS)
S77000941 PARTS BAG (LK20ASRB)
Vue de la page 0
1 2 3 4

Résumé du contenu

Page 1 - LIGHT KITS

MODELS LK20FWWH • LK20FWPBLK20FWBS • LK20ASRBPage 1READ AND SAVE THESE INSTRUCTIONSTRADITIONAL BOWLLIGHT KITSWARNING TO REDUCE THE RISK OF FIRE,

Page 2 - WARRANTY

MODELS LK20FWWH • LK20FWPBLK20FWBS • LK20ASRBPage 2WARRANTYNuTone Ceiling Fans and AccessoriesLimited WarrantyWARRANTY PERIOD: NuTone warrants to th

Page 3 - CON COPA TRADICIONAL

MODELOS LK20FWWH • LK20FWPBLK20FWBS • LK20ASRBPágina 3LEA Y GUARDE ESTAS INSTRUCCIONESKITS DE ILUMINACIÓNCON COPA TRADICIONALADVERTENCIA PARA REDU

Page 4 - GARANTÍA

MODELOS LK20FWWH • LK20FWPBLK20FWBS • LK20ASRBPágina 4GARANTÍAVentiladores de techo y accesorios NuToneGarantía limitadaPERIODO DE GARANTÍA: NuTone g

Commentaires sur ces manuels

Pas de commentaire