NuTone VX550 Guide d'installation télécharger pdf (Page 34)

Be sure all inlets are closed and soil bag (for VX475, VX550

& VX1000 models) is in place. Check switch on power unit

for manual on/off operation. Check that indicator light on

side of power unit is lit and is in green mode.

Check each wall inlet to be sure contacts activate power unit

when hose is inserted and switched on, if applicable. If using

CI370 or C1358 Indicating Inlet, be sure LED on inlet is

green when hose is inserted/switched on. If Central

Cleaning hose is not available at the time, a short piece of

wire can be used to short contacts in wall inlet to activate

power unit. Check each wall inlet and tubing connection for

air leaks. Check power unit for leaks around inlet tube and

dirt receptacle.

Make sure the filter bag is properly installed in the power unit

according to directions printed on the bag or in homeowner’s

manual. Remove the extra bag and owner's manual from the

power unit dirt receptacle. It may be convenient to store

them with the cleaning tools and accessories.

Now it’s time to enjoy the benefits of a NuTone Central

Cleaning System. See Homeowner’s Manual for operating

and care information.

FINAL SYSTEM CHECK

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 40

Pas de commentaire

NuTone VX550 Guide d'installation Page 34